10114 – 0000
The ink cartridge is equipped with a sealing cap that is very easy to remove by hand. The cap makes sure that the valve stays closed while the cartridge is being filled with ink, and also provides security during transport. The cap can also be used to tightly reseal a partially emptied ink cartridge after use. Both full and partially emptied ink cartridges have a very long shelf life. Even after being stored for a long time, they can be opened and used without any loss of ink.
The plunger has special air channels that en- sure reliable venting of the cartridge while pressing the ink out. Ink penetrates the air channels, where it hardens to seal them off airtight. The special geometry of the plunger ensures perfect wiping off so that the cartridge can be emptied virtually 100%.
Numerous inkfeed systems based on these proven, established Ritter ink cartridges are now available on the market.
|Dimensions (outside diameter x height)||99 mm x 366 mm
(approx. 3.9 in x 14.4 in)
|Height with assembled bajonet cap||368 mm (14.5 in)|
|Height with assembled stand cap||373 mm (14.7 in)|
|Weight incl. plunger||200 g (approx. 0.44 lbs)|
|Residual ink after emptying||approx. 10-20 g (0.02-0.05 lbs) or approx. 0,5-1% of total|
|Packaging units for empty cartridges||48 cartridges per cardboard box
480 cartridges per pallet
|Packaging size (length x width x height) and packaging volume of pallet holding empty cartridges||1,20 m x 0,80 m x 2,15 m = 2,064 m3|
|Special transport requirements||Empty and filled cartridges must be shipped with the valve side facing down in specially prepared cartons. Recyclable trays can be used for this purpose.|